TABLE OF CONTENTS

	PAGE
FORWARD	i
SECTION 1 - INTRODUCTION
1.1 PURPOSE	I-1
1.2 OWASA	I-1
1.3 Definitions	I-1
1.4 Abbreviations	I-5
SECTION 2 - standard specifications
00950 – measurement & payment
1.1 trenching, backfilling and compaction of utilities	00950-1
1.2 water	00950-6
1.3 sewer	00950-15
02275 – trenching, backfilling, and compaction of utilities Trenching, Backfilling and Compaction of Utilities Revision Summary Sheet
part 1 - general
1.1 general	02275-1
1.2 related documents	02275-1
1.3 summary	02275-1
1.4 Definitions	02275-2
1.5 submittals	02275-3
1.6 quality assurance	02275-4
1.7 quality standards	02275-4
1.8 testing services	02275-6
1.9 project conditions	02275-6
1.10 locating services	02275-7
1.11 coordination	02275-7
1.12 public convenience	02275-8
1.13 erosion and sedimentation control and npdes montitoring, controls, and limitations for permitted discharges	02275-8
Part 2 – products
2.1 soil, bedding and backfill	02275-10
2.2 miscellaneous	02275-13
part 3 - preparation
3.1 preparation	02275-14
3.2 TRENCH EXCAVATION	02275-21
3.3 BEDDING	02275-28
3.4 BACKFILLING (MATERIALS AND METHODS)	02275-29
3.5 COMPACTION/DENSITY	02275-31
3.6 SERVICE CUTS, DIRECTIONAL BORED OR PUNCHED SERVICE	02275-34
3.7 PAVEMENT REPAIR AND REPLACEMENT	02275-34
3.8 BLASTING	02275-35
3.9 HIGHWAY CROSSING	02275-37
3.10 RAILROAD CROSSING/TRACKS	02275-38
3.11 UNDERGROUND RIVER OR CREEK CROSSINGS	02275-38
3.12 SURFACE WATER CROSSINGS	02275-39
3.13 CONCRETE COLLARS ON SEWER MAINS	02275-39
3.14 CLEANUP AND RESTORATION OF SITE	02275-40
3.15 SEEDING & GROUNDCOVER	02275-40
3.16 MISCELLANEOUS	02275-41

02510 – WATER DISTRIBUTION

Water Distribution Revision Summary Sheet

part 1 - general

1.1 RELATED DOCUMENTS

02510-1

1.2 SUMMERY

02510-1

1.3 DEFINITIONS

02510-1

1.4 SUBMITTALS

02510-2

1.5 QUALITY ASSURANCE

02510-2

1.6 QUALITY STANDARDS

02510-3

1.7 PRODUCT DELIVERY, STORAGE AND HANDLING

02510-4

1.8 PRODUCT SUBSTITUTIONS

02510-5

1.9 PROJECT CONDITIONS

02510-5

1.10 LOCATING SERVICES

02510-7

1.11 COORDINATION

02510-7

Part 2 – products

2.1 PIPE AND FITTINGS

02510-7

2.2 VALVES AND FIRE HYDRANTS

02510-14

2.3 MISCELLANEOUS APPURTENANCES

02510-21

Part 3 – EXECUTION

3.1 PIPE AND FITTINGS

02510-28

3.2 VALVES AND HYDRANTS

02510-38

3.3 MISCELLANEOUS APPURTENANCES

02510-41

3.4 TESTING AND DISINFECTION

02510-45

3.5 FINAL ACCEPTANCE

02510-54

	TABLE OF DETAILS
Detail Number	Water Details
-	Water Distribution Revision Summary Sheet
511.01	Detail of Rock Excavation
512.01	Standard Vertical Bend Detail
512.02	Blocking Detail for Horizontal Bends and Tee
512.03	Blocking Detail for PVC Pipe In-Line Valve
512.04	4” to 12” Standard Tapping Sleeve and Valve Assembly
512.05	Line Abandonment Detail
512.06	Standard ¾” and 1” Water Tapping Detail
512.07	Thrust Footing Detail
512.08	Thrust Collar & Blocking with Meg-A-Lug Thrust Ring
512.09	Tie Rod Anchors Datum Chart
513.01	Standard Screw Valve Box Detail
513.02	Valve Box Stabilizing Pad Details
513.03	Blank Sheet
513.04	1” Air Release Valve & Manhole (Pipe 2” to 12”)
513.05	2” Air Release Valve & Manhole (Pipe 16” and Larger)
513.06	Butterfly Valve (16” and Larger) in precast Manhole
513.07	Blank Sheet
513.08	Gate Valve (16” and Larger) in Precast Manhole
514.01	Fire Hydrant Painting Specifications
514.02	Typical Fire Hydrant Streets with Bar Ditch
514.03	Typical Fire Hydrant Streets with Curb & Gutter
514.04	Permanent 2” Blow-Off Assembly for Mains Up To 8”
514.05	Temporary 2” Blow-Off Assembly for Mains Up To 24”
514.06	Permanent Blow-Off Assembly for Mains 12” and Larger
514.07	Purity Sampling Connection 2” Blow Off Line
514.08	Purity Sampling Connection On Fire Hydrant
514.09	Purity Sampling Connection at Backflow Preventer
515.01	¾” Single & 1” Dual Service Installation
515.02	¾” Gang Service Domestic Meter Installation
515.03	Blank Sheet
515.04	Standard 2” Meter Vault
515.05	¾” to 2” DCV, RPZ Assembly (Indoor)
515.06	¾” to 2” DCV, RPZ Assembly (Above Ground)
515.07	¾” or 1” DCV Assembly (Alternate Under Ground Box)
515.08	¾” or 2” DCV Assembly (Under Ground Vault)
515.09	2 ½” to 10” DCV, DDCV, RPZ Assembly (Indoor)
515.10	2 ½” to 10” DCV, DDCV, RPZ Assembly (Above Ground)
515.11	2 ½” to 10” DCV, DDCV, RPZ Assembly (Under Ground Vault)
515.12	Backflow Prevention Tanker Truck (Air Gap & Reduced Pressure)
515.13	3” to 8” Water Meter with Bypass (Under Ground Vault)
515.14	Low Profile Vault / Oversized Access (3” – 8” Underground Meter Vault)
515.15	1” or 2” Irrigation Meter on a 3” to 8” Under Ground Meter Vault
516.01	Standard Water Manhole Frame and Cover
517.01	Typical Detail for Bore Under Paved Roads/Highways

02530 – sanitary sewer Sanitary Sewer Revision Summary Sheet
part 1 - general
1.1 RELATED DOCUMENTS	02530-1
1.2 SUMMARY	02530-1
1.3 DEFINITIONS`	02530-1
1.4 PERFORMANCE	02530-2
1.5 SUBMITTALS	02530-2
1.6 QUALITY ASSURANCE	02530-3
1.7 QUALITY STANDARDS	02530-3
1.8 PRODUCT DELIVERY, STORAGE AND HANDLING	02530-4
1.9 PRODUCT SUBMITTALS	02530-5
1.10 PROJECT CONDITIONS	02530-6
1.11 LOCATING SERVICES	02530-7
1.12 COORDINATION	02530-8
part 2 - PRODUCTS
2.1 PIPE & FITTINGS	02530-8
2.2 MISCELLANEOUS APPURTENANCES AND MATERIAL	02530-12
PART 3 - EXECUTION