The following Manual of Standards, Specifications, and Design is effective January 1, 2025 and is available in PDF format.
| Title | |
|---|---|
| A. Entire Manual | |
| B. Cover | |
| C. Foreward | |
| D. Table of Contents | |
| E. Section 1. Introduction | |
| F. Section 2. Standard Specifications. | |
| G. 02275 Trenching, Backfilling, and Compaction of Utilities | |
| H. 02510 Water Distribution | |
| I. 02520 Reclaimed Water Distribution | |
| J. 02530 Sanitary Sewer | |
| K. Section 3. Water and Sewer Design | |
| L. Section 4. Procedure for Approval of Water and/or Sewer Extension Projects | |
| M. OWASA Standard Details – Table of Contents for Standard Details | |
| N. OWASA Standard Details – Full Set |
The following OWASA Standard Details are effective January 1, 2025 and are available in .pdf and AutoCAD (.dwg) format.
| Detail Number | Title | |
|---|---|---|
| 511.01 | Detail Of Rock Excavation | |
| 512.01 | Standard Vertical Bend Detail | |
| 512.02 (1 of 4) | Blocking Detail For Horizontal Bends And Tee | |
| 512.02 (2 of 4) | Blocking Detail For Horizontal Bends And Tee | |
| 512.02 (3 of 4) | Blocking Detail For Horizontal Bends And Tee | |
| 512.02 (4 of 4) | Blocking Detail For Horizontal Bends And Tee | |
| 512.03 | Blocking Detail For PVC Pipe In-Line Valve | |
| 512.04 | 4” To 12” Standard Tapping Sleeve And Valve Assembly | |
| 512.05 (1 of 2) | Line Abandonment Detail For Unpaved Areas | |
| 512.05 (2 of 2) | Line Abandonment Detail For Unpaved Areas | |
| 512.06 | Standard ¾” And 1” Water Tapping Detail | |
| 512.07 | Thrust Footing Detail | |
| 512.08 (1 of 2) | Thrust Collar & Blocking With Wedge Action Restrainer Gland | |
| 512.08 (2 of 2) | Thrust Collar & Blocking With Wedge Action Restrainer Gland | |
| 512.09 | Tie Rod Anchors Datum Chart | |
| 513.01 | Standard Screw Valve Box Detail | |
| 513.02 (1 of 2) | Valve Box Stabilizing Pad Details - NCDOT Road | |
| 513.02 (2 of 2) | Valve Box Stabilizing Pad Details - Town & Private Roads | |
| 513.03 | Zone Separator Detail | |
| 513.04 | 1” Air Release Valve & Manhole (Pipe 2” To 12”) | |
| 513.05 | 2” Air Release Valve & Manhole (Pipe 16” And Larger) | |
| 513.06 | Butterfly Valve (16” & Larger) When Precast Manhole Required | |
| 513.08 | Gate Valve (16” And Larger) When Precast Manhole Required | |
| 514.01 | Fire Hydrant Painting Specifications | |
| 514.02 | Typical Fire Hydrant Streets With Bar Ditch | |
| 514.03 (1 of 2) | Typical Fire Hydrant Streets With Curb & Gutter - Rodded | |
| 514.03 (2 of 2) | Typical Fire Hydrant Streets With Curb & Gutter - Restrained Joint | |
| 514.04 | Permanent 2” Blow-Off Assembly For Mains Up To 8” | |
| 514.05 | Temporary 2” Blow-Off Assembly For Mains Up To 24” | |
| 514.06 | Permanent Blow-Off Assembly For Mains 12” And Larger | |
| 514.07 | Purity Sampling Connection Details - 2” Blow Off Line | |
| 514.08 | Purity Sampling Connection Details - On Fire Hydrant | |
| 514.09 | Purity Sampling Connection Details - At Backflow Preventer | |
| 515.01 (1 of 2) | ¾” Single & 1” Dual Service and Fire Protection Service Installation | |
| 515.01 (2 of 2) | ¾” Single & 1” Dual Service and Fire Protection Service Installation | |
| 515.03 | Detector Meter Installation (Fire System) | |
| 515.04 (1 of 3) | Standard 2” Meter Vault | |
| 515.04 (2 of 3) | Standard 2” Meter Vault | |
| 515.04 (3 of 3) | Standard 2” Meter Vault | |
| 515.05 (1 of 2) | ¾” To 2” RPZ Assembly (Indoor) | |
| 515.05 (2 of 2) | ¾” To 2” RPZ Assembly (Indoor) | |
| 515.06 (1 of 3) | ¾” To 2” RPZ Assembly (Above Ground) | |
| 515.06 (2 of 3) | ¾” To 2” RPZ Assembly (Above Ground) | |
| 515.06 (3 of 3) | ¾” To 2” RPZ Assembly (Above Ground) | |
| 515.09 (1 of 3) | 2 ½” To 10” RPZ Assembly (Indoor) | |
| 515.09 (2 of 3) | 2 ½” To 10” RPZ Assembly (Indoor) | |
| 515.09 (3 of 3) | 2 ½” To 10” RPZ Assembly (Indoor) | |
| 515.10 (1 of 3) | 2 ½” To 10” RPZ Assembly (Above Ground) | |
| 515.10 (2 of 3) | 2 ½” To 10” RPZ Assembly (Above Ground) | |
| 515.10 (3 of 3) | 2 ½” To 10” RPZ Assembly (Above Ground) | |
| 515.12 | Backflow Prevention Tanker Truck (Air Gap & Reduced Pressure) | |
| 515.13 (1 of 3) | 3” To 8” Water Meter With Bypass (Underground Vault) | |
| 515.13 (2 of 3) | 3” To 8” Water Meter With Bypass (Underground Vault) | |
| 515.13 (3 of 3) | 3” To 8” Water Meter With Bypass (Underground Vault) | |
| 515.14 (1 of 2) | Low Profile Vault / Oversized Access (3” – 8” Underground Meter Vault) | |
| 515.14 (2 of 2) | Low Profile Vault / Oversized Access (3” – 8” Underground Meter Vault) | |
| 515.15 (1 of 2) | 1” Or 2” Irrigation Meter On A 3” To 8” Underground Meter Vault | |
| 515.15 (2 of 2) | 1” Or 2” Irrigation Meter On A 3” To 8” Underground Meter Vault | |
| 515.16A (1 of 3) | Chiller Deduct Meter With P-Trap (On Discharge Line) | |
| 515.16B (2 of 3) | Chiller Deduct Meter With P-Trap (On Discharge Line) | |
| 515.16C (3 of 3) | Chiller Deduct Meter With P-Trap (On Discharge Line) | |
| 515.17A (1 of 3) | Chiller Deduct Meter (On Intake Line) | |
| 515.17B (2 of 3) | Chiller Deduct Meter (On Intake Line) | |
| 515.17C (3 of 3) | Chiller Deduct Meter (On Intake Line) | |
| 516.01 | Standard Water Manhole Frame And Cover | |
| 517.01 (1 of 2) | Typical Detail For Bore Under Paved Roads/Highways | |
| 517.01 (2 of 2) | Typical Detail For Bore Under Paved Roads/Highways |
| Detail Number | Title | |
|---|---|---|
| 531.01 (1 of 2) | Sanitary Sewer Bedding Detail - Ductile Iron | |
| 531.01 (2 of 2) | Sanitary Sewer Bedding Detail - PVC | |
| 531.02 | Earth Fill Over Sewer Pipe Detail | |
| 532.01 (1 of 3) | Standard Eccentric Manhole Detail - Cone | |
| 532.01 (2 of 3) | Standard Eccentric Manhole Detail - Flat Top | |
| 532.01 (3 of 3) | Standard Eccentric Manhole Detail - Sleeve Boot | |
| 532.02 | Standard Sewer Invert Plans For Manhole | |
| 532.03 (1 of 2) | Standard Outside Drop Manhole With Tee Manhole Detail | |
| 532.03 (2 of 2) | Outside Drop With Wye Manhole Detail (Only With Special Permission) | |
| 532.04 (1 of 2) | Sanitary Sewer Manhole Plugging Detail | |
| 532.04 (1 of 2) | Sanitary Sewer Manhole Plugging Detail | |
| 532.05 | Standard Manhole Venting Detail | |
| 532.06 (1 of 3) | Manhole Ring And Cover Grade Adjustment | |
| 532.06 (2 of 3) | Manhole Ring And Cover Grade Adjustment | |
| 532.06 (3 of 3) | Manhole Ring And Cover Grade Adjustment | |
| 532.07 | Structure Protection Unfinished Road Grade | |
| 532.08 (1 of 2) | Precast Concrete Doghouse Manhole | |
| 532.08 (2 of 2) | Precast Concrete Doghouse Manhole | |
| 532.09 | Infi-Shield External Sealing Detail | |
| 533.01 (1 of 2) | Sanitary Sewer Manhole Frame And Cover | |
| 533.01 (2 of 2) | Sanitary Sewer Manhole Frame And Cover - Composite | |
| 533.02 | Sanitary Sewer Watertight Manhole Frame And Cover | |
| 534.01 | 4” Sewer Tap And Stub-Out Paved Application Clean Out | |
| 534.02 | Typical Sewer And Combined Easement Detail | |
| 535.01 (1 of 3) | Aerial Crossing Pedestrian Barrier - Casing Pipe | |
| 535.01 (2 of 3) | Aerial Crossing Pedestrian Barrier - Carrier Pipe | |
| 535.01 (3 of 3) | Aerial Crossing Pedestrian Barrier - Sign | |
| 536.01 | Concrete Collar Detail | |
| 536.02 | Concrete Pier Detail | |
| 536.03 | Concrete Pier Saddles Detail | |
| 536.04 | Detail Of Bracing For Channel Crossings | |
| 536.05 | Sanitary Sewer Line And Manhole Abandonment Detail | |
| 536.06 | Stream Crossings For Sewer Mains | |
| 536.08 (1 of 2) | Sewer Line Crossing Beneath Stream Bed | |
| 536.08 (2 of 2) | Sewer Line Crossing Beneath Stream Bed | |
| 537.01 | Grease Interceptor And Oil Sand Separator Detail | |
| 538.01 (1 of 2) | Combination Air Valve Air Release Manhole | |
| 538.01 (2 of 2) | Combination Air Valve Air Release Manhole | |
| 539.01 | Typical Submersible Pump Station Site Layout | |
| 539.02 | Typical Emergency Pump Connection | |
| 539.03 | Typical Chain-Link Fence Detail – 8 Ft. Height | |
| 539.04 | Yard Hydrant (Non-Freeze) | |
| 539.05 | Pump Station Service Panel Detail |